13.18. An intermediate shaft - removal and installation
1. Establish forward wheels directly and lift the car.
|17.2а Elements of a steering column
1. The furnish panel
2. A clip
3. Air branch pipes
4. A coupling bolt
5. The panel of a sound signal
6. A steering wheel
7. The bottom casing
8. The top casing
9. Fixing bolts of the bottom arm
10. Bolts and nuts of the top arm
11. A steering column
13, the Casing of an intermediate shaft
|17.2б Make adjusting отмотки on intermediate to a shaft and a shaft of a steering column, and also on the bottom end of an intermediate shaft and an entrance shaft рулевсго the mechanism (model Precis is shown)
2. Make adjusting marks in the universal hinge, to a shaft of a steering column, the bottom universal hinge and an entrance shaft of the steering mechanism (17.2а
3. Turn off coupling bolts of the top and bottom clips of the universal hinge.
|17.4 Dustproof cover fastens to a partition by means of three bolts (model Precis is shown)
4. Turn off bolts of a dustproof casing (17.4
) and remove it.
5. Disconnect an intermediate shaft from a shaft of the steering mechanism. Disconnect an intermediate shaft from a shaft of a steering column and remove it from the car.
6. Installation is spent upside-down removals. Combine adjusting marks and tighten coupling bolts till the demanded moment of an inhaling.