13-20-nakonechniki-rulevykh-tyag-snyatie-i-ustanovka.html
13.20. Tips of steering draughts - removal and installationRemoval
1. Lift the car and remove a forward wheel.
|
19.2а Turn off a counternut, keeping steering draught a wrench
|
|
19.2б Mark position of installation of a tip on draught
|
2. Keeping steering draught flat-nose pliers, turn off a counternut so that it was possible to mark position of a tip of steering draught on draught ( 19.2а and 19.2б).
3. Get to the check and turn off a nut on a tip of steering draught.
|
19.4 For removal of a tip of steering draught from the lever of a rotary pin use a stripper
|
4. Disconnect steering draught from the lever of a rotary pin by means of a stripper ( 19.4).
5. Turn off a tip from steering draught.
Installation
6. Twirl a tip on steering draught to made before a mark and establish draught on the lever of a rotary pin. Reliably tighten a counternut of steering draught.
7. Establish корончатую a nut and tighten it till the demanded moment of an inhaling. Establish new to the check.
8. Establish a wheel and lower the car on the earth.
9. Check up adjustment of forward wheels.
|