13.14. The shock-absorber of a back suspension bracket - removal and installation
1. Lift the car and remove a wheel.
|12.2 Turn off the bottom fixing bolt and a shock-absorber nut (it is specified by an arrow)
2. Establish a jack under the lever of a suspension bracket and lift it so to remove a part of pressure of a spring from the shock-absorber. Turn off the bottom fixing bolt of the shock-absorber (12.2
|12.3б Fixing bolts of the shock-absorber of a back suspension bracket (are specified by arrows) are located near a luggage carrier wall
|13.3 On model Precis for untwisting of the top fixing bolt and a nut two keys are necessary
3. Turn off a nut and a bolt of the top fastening (13.3
) and remove the shock-absorber.
4. Installation is spent upside-down removals.