|
13-5-stojjka-perednejj-podveski-i-pruzhina-snyatie-osmotr-i-ustanovka.html
13.5. A rack of a forward suspension bracket and a spring - removal, survey and installationRemoval
1. Lift the car and remove a wheel.
|
|
4.2 Remove кронштеин a brake hose (it is specified by an arrow) from a rack
|
2. Remove a brake hose from a rack ( 4.2).
|
|
4.3 Turn off two nuts and bolts, крепящие a rotary pin to a rack (are specified by arrows)-beat out bolts if it is necessary
|
3. Turn off nuts of fastening of a rack to a rotary pin and beat out fixing bolts ( 4.3).
|
|
4.4 Remove a rotary pin from a rack
|
4. Remove a rotary pin from a rack ( 4.4).
|
|
4.5 Supporting a rack, turn off fixing nuts (are specified by arrows)
|
5. Supporting a rack, turn off nuts of fastening of a rack to a body ( 4.5). Remove a rack of a suspension bracket from the car. Survey
6. Examine a rack on presence of traces of leak the Jew - of a bone, dents, cracks or other damages.
7. Examine a spring on presence of cracks or covering damages.
8. Replace a spring if it is necessary.
Installation
9. Establish a rack on the car and acquire a nut of fastening of a rack to a body.
10. Establish a rotary pin on a rack and insert two bolts. Tighten nuts till the demanded moment of an inhaling.
11. Establish an arm of a brake hose on a rack and reliably twirl a fixing bolt.
12. Establish a wheel and lower the car on the earth.
13. Tighten nuts of the top fastening till the demanded moment of an inhaling.
| 