|
13-3-stabilizator-poperechnojj-ustojjchivosti-perednejj-podveski-snyatie-i-ustanovka.html
13.3. The stabilizer of cross-section stability of a forward suspension bracket - removal and installationRemoval
1. Lift the car and remove forward wheels.
2. Remove forward section of an exhaust pipe.
3. On models Colt, Lancer, Mirage disconnect tips of steering draughts from rotary pins for reception of in addition free space.
|
|
2.4 Turn off three bolts (are specified by arrows), крепящие a fixing arm
|
4. Turn off bolts, крепящие a fixing arm and remove it ( 2.4). 5. Remove a suspension bracket cross-beam.
|
|
2.6а Elements of the stabilizer of cross-section stability and распорки (Precis)
1. The plug
2. The plug
3. The stabilizer of cross-section stability
4. The plug
5. The plug
6. Распорка
|
|
|
2.6б Turn off a bolt (it is specified by an arrow) and disconnect the stabilizer of cross-section stability from a connecting link (is shown model Galant)
|
|
|
2.7 Turn off bolts (it is specified by an arrow) all arms, lower arms and remove the stabilizer of cross-section stability from the car
|
6. Remove bolts and clips, крепящие the stabilizer of cross-section stability to suspension bracket levers ( 2.6а and 2.6б). 7. Turn off bolts of fastening of an arm of the stabilizer of cross-section stability and remove the stabilizer of cross-section stability from the car ( 2.7). 8. Remove arms from a bar of the stabilizer of cross-section stability and examine plugs on presence of cracks or deterioration traces. Replace plugs if it is necessary.
Installation
9. Establish plugs on a bar of the stabilizer of cross-section stability a cut forward.
10. Establish arms into place and establish the stabilizer of cross-section stability on the car. Insert bolts of arms, but yet do not tighten them.
11. Establish plugs, clips and bolts, крепящие the stabilizer of cross-section stability to suspension bracket levers. Slightly twirl bolts.
12. Tighten arm bolts.
13. Lower the car on the earth and tighten bolts of clips.
| 