Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
15.1. The general description
15.2. Detection of malfunctions in electric equipment system - the general description
15.3. Safety locks - the general description
15.4. Burnt through crosspieces - the general description
15.5. Automatic switches - the general description
15.6. The relay - the general description
15.7. The ignition lock - removal and installation
15.8. The combined switch - removal and installation
15.9. Headlights of head light - removal and installation
15.10. Headlights of head light - adjustment
15.11. Replacement of bulbs
15.12. A speedometer rope - removal and installation
15.13. An instrument guard - removal and installation
15.14. Cruise-control system - the description and check
15.15. Electric стеклоподъемники - the description and check
15.16. The central lock - the description and check
15.17. Electric equipment schemes - the general description
 











4a8e3442

15-7-zamok-zazhiganiya-snyatie-i-ustanovka.html

15.7. The ignition lock - removal and installation

1. Disconnect a wire of the minus plug of the accumulator.

7.2 Elements of fastening of the lock of ignition and the combined switch
1.
Casings of a steering column
2. The combined switch
3. The ignition lock
4. The switch of the alarm bulb warning  about  the left key in the lock of ignition
5. A steering wheel



2. Remove casings of a steering column (7.2).
3. Remove fastenings of a plait of wires.
4. Disconnect a connection socket.
5. Turn off the screw and remove the lock of ignition and a plait of wires from a steering column.
6. Installation is spent upside-down removals.



15.6. The relay - the general description

15.8. The combined switch - removal and installation