Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
15.1. The general description
15.2. Detection of malfunctions in electric equipment system - the general description
15.3. Safety locks - the general description
15.4. Burnt through crosspieces - the general description
15.5. Automatic switches - the general description
15.6. The relay - the general description
15.7. The ignition lock - removal and installation
15.8. The combined switch - removal and installation
15.9. Headlights of head light - removal and installation
15.10. Headlights of head light - adjustment
15.11. Replacement of bulbs
15.12. A speedometer rope - removal and installation
15.13. An instrument guard - removal and installation
15.14. Cruise-control system - the description and check
15.15. Electric стеклоподъемники - the description and check
15.16. The central lock - the description and check
15.17. Electric equipment schemes - the general description



15.11. Replacement of bulbs

1. Рассеиватели the majority of bulbs fasten by means of screws, therefore access to bulbs to receive very easily.
2. On some bulbs рассеиватели fasten by means of latches. Remove рассеиватель from a bulb by means of a small screw-driver.

11.3а Access to some bulbs can be received, having got a cartridge from a casing (turn counter-clockwise)

11.3б For replacement of other bulbs simply get a cartridge

3. Some types of bulbs are used. For replacement of some, by a bulb it is necessary to press and turn it  counter-clockwise (11.3а and 11.3б). The others can be got from a nest simply.

11.4а On this block of switches turn a cartridge counter-clockwise and remove it from the block for access reception to a bulb

4. For access reception to bulbs of an instrument guard or switches (11.4а and 11.4б) it is necessary to remove an instrument guard or the switch.

11.4б After removal of an instrument guard turn a cartridge with a bulb and remove it from a guard, then get a bulb from a cartridge

15.10. Headlights of head light - adjustment

15.12. A speedometer rope - removal and installation