Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
14.1. The general description
14.2. A body - maintenance service and repair
14.3. Vinyl furnish - maintenance service and repair
14.4. An upholstery and rugs - leaving
14.5. Body repair - insignificant damages
14.6. Body repair - considerable damages
14.7. Loops and locks - maintenance service and repair
14.8. A windscreen and motionless glasses - replacement
14.9. A cowl - removal, installation and adjustment
14.10. Bumpers - removal and installation
14.11. The panel of furnish of a door - removal and installation
14.12. A door - removal, installation and adjustment
14.13. A luggage carrier cover - removal, installation and adjustment
14.14. A cover of a luggage carrier of models with a body of type "Hatchback" - removal, installation and adjustment
14.15. A latch, a drum of the lock and the handle - removal and installation
14.16. Glass of doors - removal and installation
14.17. External rear-view mirrors - removal and installation
14.18. Internal panels of forward wings - removal and installation
14.19. Automatic seat belts - the general description
14.20. Check of seat belts
15. A body electric equipment
 





4a8e3442






14-15-zashhelka-baraban-zamka-i-ruchka-snyatie-i-ustanovka.html

14.15. A latch, a drum of the lock and the handle - removal and installation

1 Remove the panel of furnish of a door and protective пле нку.
2. Remove glass.
Latch

15.3а Elements of the lock of a door of models with the rising external handle
1. The furnish panel
3. A plastic covering 3. A socket
4. A clip
5. A clip
6. Draught of the external handle
7. The lock
8. A clip
9. The internal handle
10. Draught of an internal latch
11. Draught of the internal handle
12. A fixing clip of a drum of the lock
13. A lock drum
14. The external handle



3 Disconnect safety draught and draught of the internal handle from a latch (15.3а and 15.3б)
4 Turn off three fixing screws and remove the lock
5  Installation is spent upside-down removals
Lock drum

15.6 Disconnect draught of a drum of the lock (1) from a lock drum, then by means of flat-nose pliers remove a fixing clip (2) from a drum of the lock (3)



6. Disconnect draught of a drum of the lock from a drum (15.6).
7. By means of flat-nose pliers remove a fixing clip and remove a drum of the lock from a door (15.6).
8. Installation is spent upside-down removals.
The internal handle

15.3б Elements of the lock of a door with the usual external handle
1 Casing
2 Lining
3 External handle of a door
4 Casing
5 Lining
6 Glass
7 Fastening
8 Lock
9 Drive of the lock of a door
10 Basis
11 Internal handle
Models with electronic стеклоподъемниками
1   Panels of furnish and protective film
2 Button
Models with mechanical стеклоподъемниками
1   Panels of furnish and protective film
2 Button



9. Turn off fixing screws (15.3а and 15.3б).
10. Remove the handle from a door.

15.11а On models Precis 1988 and 1989 of release before an inhaling of screws adjust handle position so that it rose on 48 ° (distance)



15.11б Turn off screws and move the handle if it is necessary, for adjustment of a free course



11. Installation is spent upside-down removals. Adjust a handle course before an inhaling of fixing screws (15.11а and 15.11б).
The external handle
12. Disconnect connecting draughts from the handle.
13 Turn off fixing nuts from the interior of a door and remove the handle.

15.14 Disconnect draught for adjustment of a free course of the external handle
1. A clip
2. Draught of the external handle



14. Installation is spent upside-down removals. Check up and adjust a free course of the handle if it is necessary (15.14)



14.14. A cover of a luggage carrier of models with a body of type "Hatchback" - removal, installation and adjustment

14.16. Glass of doors - removal and installation