Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
14.1. The general description
14.2. A body - maintenance service and repair
14.3. Vinyl furnish - maintenance service and repair
14.4. An upholstery and rugs - leaving
14.5. Body repair - insignificant damages
14.6. Body repair - considerable damages
14.7. Loops and locks - maintenance service and repair
14.8. A windscreen and motionless glasses - replacement
14.9. A cowl - removal, installation and adjustment
14.10. Bumpers - removal and installation
14.11. The panel of furnish of a door - removal and installation
14.12. A door - removal, installation and adjustment
14.13. A luggage carrier cover - removal, installation and adjustment
14.14. A cover of a luggage carrier of models with a body of type "Hatchback" - removal, installation and adjustment
14.15. A latch, a drum of the lock and the handle - removal and installation
14.16. Glass of doors - removal and installation
14.17. External rear-view mirrors - removal and installation
14.18. Internal panels of forward wings - removal and installation
14.19. Automatic seat belts - the general description
14.20. Check of seat belts
15. A body electric equipment
 





4a8e3442






14-12-dver-snyatie-ustanovka-i-regulirovka.html

14.12. A door - removal, installation and adjustment

1. Remove the panel of furnish of a door. Disconnect wires and clean them.
2. Establish a jack or a support under a door.
3. Make marks round fixing bolts of loops.
4. Turn off fixing bolts of loops and remove a door. Installation is spent upside-down removals.

12.5а the Wrench of the special form can be necessary for untwisting of bolts of fastening of loops to a body at position adjustment
Doors



12.5б Adjust latch position, having turned off fixing screws and having moved a latch as it is necessary



5. After door installation adjust its position and position of a latch of the lock (12.5а and 12.5б).


14.11. The panel of furnish of a door - removal and installation

14.13. A luggage carrier cover - removal, installation and adjustment