14-11-panel-otdelki-dveri-snyatie-i-ustanovka.html
14.11. The panel of furnish of a door - removal and installation1. Disconnect a wire of the minus plug of the accumulator.
|
11.2а On some models the screw of fastening of the handle of a door can be turned off, having pulled the handle on itself
|
2. Will twist fixing screws of the panel of furnish and remove handles ( 11.2а and 11.2б).
|
11.2б Fixing screws of the panel of furnish of a door are often closed by casings which can be removed by means of a screw-driver
|
|
11.3б On other models remove a clip by means of a screw-driver
|
|
11.3а On some models disconnect a clip of the handle by means of a rag
|
|
11. Зв Establish a clip back into place and establish the handle on an axis
|
3. Remove the handle стеклоподъемника ( 11.3а, 11.3б and 11. Зв) or remove and disconnect the switch стеклоподъемника.
4. Insert a knife with a wide edge or thin ломик between the panel of furnish and a door and disconnect all fixing latches.
5. Then turn off the lock handle, remove the panel of furnish and disconnect all wires.
|
11.6 Be accurate at plastic foil removal - do not tear it
|
6. For access reception to an internal part of a door unbend a protective film, trying not to tear it ( 11.6).
7. Before installation of the panel of furnish, establish into place all fixing latches.
8. Connect all wires and establish the panel on a door. Twirl fixing screws and establish handles.
|