Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
14.1. The general description
14.2. A body - maintenance service and repair
14.3. Vinyl furnish - maintenance service and repair
14.4. An upholstery and rugs - leaving
14.5. Body repair - insignificant damages
14.6. Body repair - considerable damages
14.7. Loops and locks - maintenance service and repair
14.8. A windscreen and motionless glasses - replacement
14.9. A cowl - removal, installation and adjustment
14.10. Bumpers - removal and installation
14.11. The panel of furnish of a door - removal and installation
14.12. A door - removal, installation and adjustment
14.13. A luggage carrier cover - removal, installation and adjustment
14.14. A cover of a luggage carrier of models with a body of type "Hatchback" - removal, installation and adjustment
14.15. A latch, a drum of the lock and the handle - removal and installation
14.16. Glass of doors - removal and installation
14.17. External rear-view mirrors - removal and installation
14.18. Internal panels of forward wings - removal and installation
14.19. Automatic seat belts - the general description
14.20. Check of seat belts
15. A body electric equipment
 





4a8e3442






14-9-kapot-snyatie-ustanovka-i-regulirovka.html

14.9. A cowl - removal, installation and adjustment

Removal and installation
1. Close body panels old blankets.

9.2 Make marks in loops round bolts, and also depict loop position on a cowl



2. Put adjusting marks round heads of bolts for correct adjustment of position of a cowl (9.2).
3. Disconnect ropes and wires which can stir to removal.
4. Ask to support the assistant a cowl and turn off bolts or screws, крепящие loops to a cowl,
5. Remove a cowl.
6. Installation is spent upside-down removals.
Adjustment


9.7 Turn off fixing bolts (are specified by arrows) and move a cowl as it is necessary



7.  For adjustment of position of a cowl put marks round loops (9.2 or 9.7), turn off fixing nuts or bolts and move a cowl as it is necessary (9.7).

9.8а For adjustment of position of the lock, make marks round fixing screws (are specified by arrows), turn off screws, move the lock, as
It is necessary, and twirl screws



9.8б By means of a screw-driver and a wrench change position of a latch of the lock (not on all models)



8. Adjust position of the lock of a cowl (9.8а and 9.8б).

9.9 Adjust cowl height, having changed height of a rubber emphasis (it is specified by an arrow)



9. Adjust height of a rubber emphasis (9.9).
10. Periodically grease loops and the lock.


14.8. A windscreen and motionless glasses - replacement

14.10. Bumpers - removal and installation