1.41.13. Cast disks of wheels from an aluminium alloy (if are established)
Clear disks of wheels from an alloy of aluminium by means of soap and water, protect their surface, having put protective structure. Do not use means for polishing of the chromeplated elements or abrasive cleaning substances as it will damage a sheeting
Safety measures for cast aluminium disks
Throughout run of the first 1600 km check an inhaling of nuts of wheels.
After shift or wheel replacement check an inhaling of nuts of wheels throughout 1600 km of run after wheel removal.
At using chains be careful not to damage disks.
Nuts of fastening of disks should be firm, tighten nuts only a key intended for aluminium disks.
At wheel balancing use only firm грузики (or equivalent) which fasten a rubber or plastic hammer.
Periodically check a condition of disks. At detection of damages a disk immediately replace.