Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
13.1. Technical characteristics
13.2. The general description
13.3. The stabilizer of cross-section stability of a forward suspension bracket - removal and installation
13.4. Распорка - removal and installation
13.5. A rack of a forward suspension bracket and a spring - removal, survey and installation
13.6. The shock-absorber of a rack of a suspension bracket - replacement
13.7. The suspension bracket lever - removal, survey and installation
13.8. Spherical hinges - check and replacement
13.9. A rotary pin and a nave - removal and installation
13.10. A nave of a forward wheel and the bearing - replacement
13.11. The stabilizer of cross-section stability of a back suspension bracket (only model Precis) - removal and installation
13.12. Cross-section draught - removal and installation
13.13. Springs of a back suspension bracket - removal and installation
13.14. The shock-absorber of a back suspension bracket - removal and installation
13.15. A back axis - removal, a partition and installation
13.16. A steering - the general description
13.17. A steering wheel - removal and installation
13.18. An intermediate shaft - removal and installation
13.19. The steering mechanism - removal and installation
13.20. Tips of steering draughts - removal and installation
13.21. Covers of the steering mechanism - replacement
13.22. The pump of system of hydrostrengthening of a steering - removal and installation
13.23. System of hydrostrengthening of a steering - prorolling
13.24. Wheels and tyres - the general description
13.25. Adjustment of forward wheels - the general description
13.26. Adjustment of corners of installation of wheels - the general description
14. A body
15. A body electric equipment
 





4a8e3442






13-17-rulevoe-koleso-snyatie-i-ustanovka.html

13.17. A steering wheel - removal and installation

1. Disconnect a wire of the minus plug of the accumulator.

16.2а On some models turn off screws, крепящие the panel of a sound signal to a steering column (model Galant is shown)



16.2б Raise a bottom edge of the panel of a sound signal, then remove it



2. Remove the panel of a sound signal from a steering wheel. On some models the panel fastens screws (16.2а and 16.2б).

16.3 Having turned off a nut of fastening of a steering wheel, make adjusting marks in a shaft of a steering column and a steering wheel nave



3. Turn off a fixing nut of a steering wheel and mark position of installation of a wheel on a shaft (16.3).

16.4 Use a special stripper for removal of a steering wheel from a shaft of a steering column do not knock on a shaft, trying to remove a steering wheel



4. By means of a steering wheel stripper remove a steering wheel (16.4).
5. At wheel installation combine marks in a wheel and to a shaft. Establish a fixing nut and tighten it till the demanded moment of an inhaling.
6. Establish the panel of a sound signal.
7. Connect a wire of the minus plug of the accumulator.



13.16. A steering - the general description

13.18. An intermediate shaft - removal and installation