Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
13.1. Technical characteristics
13.2. The general description
13.3. The stabilizer of cross-section stability of a forward suspension bracket - removal and installation
13.4. Распорка - removal and installation
13.5. A rack of a forward suspension bracket and a spring - removal, survey and installation
13.6. The shock-absorber of a rack of a suspension bracket - replacement
13.7. The suspension bracket lever - removal, survey and installation
13.8. Spherical hinges - check and replacement
13.9. A rotary pin and a nave - removal and installation
13.10. A nave of a forward wheel and the bearing - replacement
13.11. The stabilizer of cross-section stability of a back suspension bracket (only model Precis) - removal and installation
13.12. Cross-section draught - removal and installation
13.13. Springs of a back suspension bracket - removal and installation
13.14. The shock-absorber of a back suspension bracket - removal and installation
13.15. A back axis - removal, a partition and installation
13.16. A steering - the general description
13.17. A steering wheel - removal and installation
13.18. An intermediate shaft - removal and installation
13.19. The steering mechanism - removal and installation
13.20. Tips of steering draughts - removal and installation
13.21. Covers of the steering mechanism - replacement
13.22. The pump of system of hydrostrengthening of a steering - removal and installation
13.23. System of hydrostrengthening of a steering - prorolling
13.24. Wheels and tyres - the general description
13.25. Adjustment of forward wheels - the general description
13.26. Adjustment of corners of installation of wheels - the general description
14. A body
15. A body electric equipment
 





4a8e3442






13-12-poperechnaya-tyaga-snyatie-i-ustanovka.html

13.12. Cross-section draught - removal and installation

1.  Lift the car  and establish it on support.

11.2 Left end of cross-section draught fastens to an axis by means of a nut (it is specified by an arrow)



2. Turn off a nut on a draught left-hand side, and also a nut and a bolt on the right party (11.2). Remove Draught from arms and remove it from the car.
3. Installation is spent upside-down removals. Tighten nuts and bolts till the demanded moment of an inhaling.



13.11. The stabilizer of cross-section stability of a back suspension bracket (only model Precis) - removal and installation

13.13. Springs of a back suspension bracket - removal and installation