10.3. Search and elimination of malfunctions of an automatic transmission - the general description

1. Pass on the car to warm up a transmission to normal working temperature.

2. Check up level of a liquid of an automatic transmission.

3. Check up speed of work of the engine in an idling mode.

4. Check up adjustment of a rope throttle заслонки and adjust it if it is necessary

5. Check up a rope of the selector of an automatic transmission.

6. At leak detection try to define type of a liquid and a leak place.

7. After definition of a place of leak try to establish the reason, Its caused leak is necessary for eliminating that leak has not arisen again

8. Periodically examine the oil pallet. Check up, that bolts have been reliably tightened, and the lining was in a good condition

9. If leak, probably has been found out, that bolts the surface of a transmission or a lining are tightened too strongly, damaged герметизирующая

10. If the transmission epiploon proceeds, probably, that pressure of a liquid in a transmission too high, is littered a ventilating aperture, the nest of an epiploon or an epiploon is damaged    the surface  of a semiaxis is incorrectly established, damaged        or semiaxis bearings are worn out.

11. Check up tube consolidation щупа for check   of level   of oil. Periodically   examine area round a drive of a speedometer or the gauge of speed on presence of traces of leak. If they are present, check up a sealing ring

12. If itself картер proceeds, it is necessary to repair or replace it.

13. Check up connections of oil hoses

14. If the liquid follows from these tubes, the transmission means is overflowed, the cooling liquid has got to a liquid of an automatic transmission, the ventilating  aperture  is littered  or  drain apertures are corked.