Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
7.1. Technical characteristics
7.2. The general information
7.3. The accumulator - start of the engine by means of the second accumulator
7.4. The accumulator - removal and installation
7.5. Accumulator wires - check and replacement
7.6. Ignition system - the general description and safety measures
7.7. Ignition system - check
7.8. The ignition coil - check and replacement
7.9. The ignition distributor - removal and installation
7.10. Vacuum-proof-reader of a corner of an advancing of ignition - check and replacement
7.11. An igniter - replacement
7.12. Check and replacement of reception coil Cordia / Tredia 1.8L Turbo [1984 and 1985); Colt, Lancer, Mirage 1.6L (1985)
7.13. A centrifugal regulator - check and replacement of elements
7.14. An air backlash of the reception coil of the distributor of ignition - check and adjustment
7.15. System of additional charge of the accumulator - the general description and safety measures
7.16. System of additional charge of the accumulator - check
7.17. The generator - removal and installation Cordia, Precis and Tredia
7.18. A pressure regulator / generator brushes - replacement 1988 Precis (with generator Bosch)
7.19. System of start of the engine - the general description and safety measures
7.20. A starter - check
7.21. A starter - removal and installation
7.22. The involving relay of a starter - removal and installation
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 











4a8e3442

7-22-vtyagivayushhee-rele-startera-snyatie-i-ustanovka.html

7.22. The involving relay of a starter - removal and installation

1. Disconnect a wire of the minus plug of the accumulator.
2. Remove a starter.

21.3 For removal of the involving relay from a starter turn off a nut and disconnect a wire (it is specified by an arrow)...


3. Disconnect the big wire from the relay (21.3).

21.4... Then turn off fixing screws of the relay (are specified by arrows) and remove the relay from a starter


4.  Turn off  screws,  крепящие the relay to a starter (21.4).
5. Remove the relay from a starter.
6. Installation is spent upside-down removals.


7.21. A starter - removal and installation

8. Systems of decrease in toxicity of exhausts