7.10. Vacuum-proof-reader of a corner of an advancing of ignition - check and replacement
1. Disconnect a vacuum hose from the vacuum-proof-reader and stop up it. Then disconnect and stop up the second hose.
2. Establish a stroboscope and connect the vacuum pump to the proof-reader.
3. Start the engine, and gradually increase depression in the vacuum-proof-reader, having directed on adjusting labels a stroboscope beam.
4. The corner of an advancing of ignition should increase gradually. If the vacuum-proof-reader holds depression, means, a plate of the mechanism of an advancing of ignition in the distributor заедает. If the corner of an advancing of ignition does not increase, and the vacuum-proof-reader passes air, replace it.
5. Remove a rotor from an axis.
|9.6 For removal of the vacuum-proof-reader from the distributor turn off two fixing screws (are specified by arrows)...
6. Turn off fixing nuts of the vacuum-proof-reader (9.6
|9.7... Then incline it, remove from a pin on the breaker and remove from the distributor
7. Disconnect a connecting link from a pin on the breaker and remove vacuum-proof-reader (9.7
8. Installation is spent upside-down removals.