Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
6.1. Technical characteristics
6.2. The general description
6.3. Release of pressure from the power supply system (model with fuel injection)
6.4. The fuel pump / pressure of fuel - check
6.5. Fuel tubes and connections - check and replacement
6.6. The fuel pump - removal and installation
6.7. A fuel tank - removal and installation
6.8. A fuel tank - clearing and repair
6.9. The air filter - removal and installation
6.10. The carburettor - removal and installation
6.11. The carburettor - diagnostics and a partition
6.12. The carburettor - check and adjustment
6.13. System of injection of fuel - check
6.14. The throttle case (models with point-to-point injection of fuel TBI) - removal, a partition and installation
6.15. The fuel filter - the general description
6.16. System of multidot injection of fuel (MPI) - removal and installation of elements
6.17. An accelerator rope - removal, installation and adjustment
6.18. Service of system of release of the fulfilled gases - the general description
6.19. Турбокомпрессор - the general description
6.20. Турбокомпрессор - check
6.21. Турбокомпрессор - removal and installation
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 





4a8e3442






6-9-vozdushnyjj-filtr-snyatie-i-ustanovka.html

6.9. The air filter - removal and installation

1. Remove a cover and filtering element. On models with multidot injection of fuel remove the accumulator, a hose of giving of air and the gauge of a stream of air.
2. Disconnect wires and the hoses, stirring to filter removal.

8.3а the Arrangement of fixing bolts (are specified by arrows) air filter on models with the carburettor engine. Do not forget to turn off a nut-lamb and to mark and disconnect all necessary hoses and wires


3. Turn off fixing bolts and nuts and remove the filter (8.3а and 8.3б).

8.3б With the help трещоточного a key turn off fixing bolts of the air filter (model with fuel injection)


4. Installation is spent upside-down removals.



6.8. A fuel tank - clearing and repair

6.10. The carburettor - removal and installation