5.5. A radiator - removal and installation

1. Disconnect a wire of the minus plug of the accumulator.

2. Merge cooling liquid.

3. Unfasten collars from hoses, then disconnect радиаторные hoses from branch pipes. If they look strongly worn out, it is necessary to replace them.

4. Disconnect a hose from a jellied mouth of a radiator.

4.5 to disconnect a wire of the fan of the engine, press a pad (it is specified by an arrow).

5. Disconnect a socket of connection  of the fan of cooling (4.5).

6. If on the car the automatic transmission is established, disconnect tubes of system of cooling from a radiator.

7. Not to admit liquid leak, it is necessary to cork all branch pipes.

8. Disconnect a hose of the channel of an air inlet and an air cleaner if they are established.

4.9 Turn off bolts, крепящие an arm and insulators to a radiator, (engine Galant in volume 2,0 is shown)

9. Unscrew assembly bolts, крепящие a radiator. (4.9)

10. Accurately remove a radiator.

11. Examine a radiator on presence of traces of leaks and damages. At their detection it is necessary to replace a radiator.

12. Clear a radiator of a dirt and dead insects.

13. Installation is spent upside-down removals.

14.  Fill in cooling liquid in cooling system.

15. Get the motor and check up system on presence of traces of leaks.

When the engine will get warm to normal temperature, once again check up level охладительной liquids.

16. If on the car the automatic transmission is established, check up level of a liquid and add as required.