|
5-13-sistema-kondicionirovaniya-vozdukha-i-otopleniya-zamena-ustanovka-provodov.html
5.13. Air and heating central air - replacement, installation of wires.
|
|
12.4а Fixing details of a control rope.
1. A tube
2. A clip
3. The plug
4. A rope
5. An emphasis
6. A pin of a choice of a mode of functioning of a heating system of back glass.
|
|
|
12.4б Fixing details of a rope рециркуляции air
1. A tube
2. An arm of fastening of a rope
3. The system lever рециркуляции air
4. A pin of a choice of a mode of functioning of a central air of air.
5. A rope
6. A clip
|
|
|
12.4в Details of fastening of a temperature rope
1. A tube arm.
2. A tube.
3. A clip.
4. The plug of fastening of a rope.
5. A rope.
6. A pin of a choice of a mode of functioning of system of heating and cooling.
7. The water delivery lever.
|
Replacement
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove the panel of furnish of an instrument guard.
3. Remove a glove compartment and console covers.
4. Remove from ropes clips, disconnect ropes from a hairpin of a control lever and disunite them.
|
|
12.5 Screws of fastening of the block of management of a central air of air and heating (are specified by arrows).
|
5. Turn off fixing screws, the block of management of a central air of air and heating ( 12.5). 6. Disconnect devices from the panel.
7. Installation is spent upside-down removals.
Installation of ropes
|
|
12.8 For replacement of a rope the system lever is established in a heating mode.
1. 8 mm.
2. Standard position of the lever.
|
|
|
12.9 For replacement of a rope the system lever рециркуляции air is established in a mode of switching-off of the fan.
1. 53 mm.
2. Standard position of the lever.
|
|
|
12.10 to replace a rope, it is necessary to establish the temperature lever in extreme left position
1. Standard position of the lever.
2. 8 mm.
|
Ventiljatsionno-heating rope
8. Include system of heating ( 12.8). Establish the lever on a heating minimum level, attach a rope to the lever and replace a clip. System rope рециркуляции air
9. Switch off the fan ( 12.9). Establish the lever on a ventilation minimum level, attach a rope to the lever and replace a clip. Rope of regulation of temperature
10. Establish the lever of system of heating in the left position, establish the lever of the water gate on a maximum level, attach a rope to the lever and replace a clip ( 12.10).
| 