Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
4.1. Technical characteristics
4.2. The general description
4.3. Engine major repairs - the general remarks
4.4. Diagnostics of the engine by means of the vacuum gauge, check of a compression and dismantle of the power unit (security measure)
4.5. Installation of the piston of cylinder N 1
4.6. Engine removal - the general description
4.7. The engine - removal and installation
4.8. Engine major repairs - alternative methods
4.9. An engine partition - a dismantling order
4.10. A head of the block of cylinders - dismantling
4.11. A head of the block of cylinders - clearing and survey
4.12. Valves - repair and installation
4.13. A head of the block of cylinders - assemblage
4.14. Pistons and rods - removal
4.15. A cranked shaft - removal
4.16. The block of cylinders - clearing
4.17. The block of cylinders - survey
4.18. Хонингование cylinders
4.19. Pistons and rods - survey
4.20. A cranked shaft - survey
4.21. Loose leaves radical and шатунных bearings - survey
4.22. An engine partition - an assembly order
4.23. Piston rings - installation
4.24. A cranked shaft - installation and check of a lubricant backlash of radical bearings
4.25. Installation of a back epiploon of a cranked shaft
4.26. Pistons and rods - installation and check of a lubricant backlash of the bearing
4.27. The first start of the engine after a partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 






4a8e3442






4-9-pereborka-dvigatelya-poryadok-razborki.html

4.9. An engine partition - a dismantling order

1. Establish the engine at the stand or on a floor.

8.2а the Engine in volume of 1,5 l - a kind from the party газораспределительного a belt


8.2б the Engine in volume of 1.5 l - twisted from an inlet collector


8.2в the Engine in volume of 1,5 l - a kind from a final collector


8.2г the Engine 2.0L SOHC - a kind from the party газораспределительного a belt


8.2д the Engine 2.0L SOHC - a kind from an inlet collector


8.2е the Engine 2.OL SOHC - a kind from a final collector


2. Remove all external elements of the engine (8.2а, 8.2б, 8.2в, 8.2г, 8.2д and 8.2е), including: the Generator and arms
Elements of system of decrease in toxicity of exhausts the Distributor of ignition, a wire of a high voltage and a spark plug the Thermostat and a cover of the thermostat the Water pump
The carburettor and all elements of system of injection of fuel the Inlet and final collector the Oil filter of Fastening of the engine Coupling and a flywheel / a leading disk the Back plate of the engine
3. If it is necessary, remove a head of the block of cylinders, oil картер and the oil pump.

8.4 Internal elements of the engine
1. Маховик*
2. Gear венец*
3. A transitive plate * *
4. Conducting диск* *
5. Transitive пластина* *
6.
7. A back plate
8. A coupling casing
9. A back epiploon
10. An epiploon casing
11. A lining
12.  A cover  of the radical  bearing
13. The bottom loose leaf of the radical bearing
14. A cranked shaft
15. The top loose leaf of the radical bearing
* Cars with a mechanical transmission
* * Cars with an automatic transmission


4. If you are going to spend a full partition of the engine, remove internal elements of the engine (8.4) in a following order:
Cover клапанного the mechanism
Inlet and final collectors
Axis коромысел and коромысла
Casing газораспределительного a belt
Газораспределительный a belt and asterisks
Camshaft
Head of the block of cylinders
Oil картер
The oil pump
Casing of a back epiploon
Pistons and rods
Cranked shaft and radical bearings


4.8. Engine major repairs - alternative methods

4.10. A head of the block of cylinders - dismantling