Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
4.1. Technical characteristics
4.2. The general description
4.3. Engine major repairs - the general remarks
4.4. Diagnostics of the engine by means of the vacuum gauge, check of a compression and dismantle of the power unit (security measure)
4.5. Installation of the piston of cylinder N 1
4.6. Engine removal - the general description
4.7. The engine - removal and installation
4.8. Engine major repairs - alternative methods
4.9. An engine partition - a dismantling order
4.10. A head of the block of cylinders - dismantling
4.11. A head of the block of cylinders - clearing and survey
4.12. Valves - repair and installation
4.13. A head of the block of cylinders - assemblage
4.14. Pistons and rods - removal
4.15. A cranked shaft - removal
4.16. The block of cylinders - clearing
4.17. The block of cylinders - survey
4.18. Хонингование cylinders
4.19. Pistons and rods - survey
4.20. A cranked shaft - survey
4.21. Loose leaves radical and шатунных bearings - survey
4.22. An engine partition - an assembly order
4.23. Piston rings - installation
4.24. A cranked shaft - installation and check of a lubricant backlash of radical bearings
4.25. Installation of a back epiploon of a cranked shaft
4.26. Pistons and rods - installation and check of a lubricant backlash of the bearing
4.27. The first start of the engine after a partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 





4a8e3442






4-25-ustanovka-zadnego-salnika-kolenchatogo-vala.html

4.25. Installation of a back epiploon of a cranked shaft

1. Check up a neck of a cranked shaft on presence of scratches or jags which can damage a new epiploon.

24.2а Establish an epiploon casing on wooden blocks and beat out an old epiploon


2. Remove an old epiploon from a casing, having noticed depth of its installation. Clear a casing, oil an external edge of a new epiploon and establish it in a casing (24.2а and 24.2б).

24.2б Establish a new epiploon in a casing by means of the wooden block or a pipe piece


3. Grease an internal edge of an epiploon and establish it on a cranked shaft and the block of cylinders. Use a new lining and hermetic.
4. Gradually tighten fixing bolts.
5. Establish маслозащитное a ring an aperture downwards.


4.24. A cranked shaft - installation and check of a lubricant backlash of radical bearings

4.26. Pistons and rods - installation and check of a lubricant backlash of the bearing