Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
4.1. Technical characteristics
4.2. The general description
4.3. Engine major repairs - the general remarks
4.4. Diagnostics of the engine by means of the vacuum gauge, check of a compression and dismantle of the power unit (security measure)
4.5. Installation of the piston of cylinder N 1
4.6. Engine removal - the general description
4.7. The engine - removal and installation
4.8. Engine major repairs - alternative methods
4.9. An engine partition - a dismantling order
4.10. A head of the block of cylinders - dismantling
4.11. A head of the block of cylinders - clearing and survey
4.12. Valves - repair and installation
4.13. A head of the block of cylinders - assemblage
4.14. Pistons and rods - removal
4.15. A cranked shaft - removal
4.16. The block of cylinders - clearing
4.17. The block of cylinders - survey
4.18. Хонингование cylinders
4.19. Pistons and rods - survey
4.20. A cranked shaft - survey
4.21. Loose leaves radical and шатунных bearings - survey
4.22. An engine partition - an assembly order
4.23. Piston rings - installation
4.24. A cranked shaft - installation and check of a lubricant backlash of radical bearings
4.25. Installation of a back epiploon of a cranked shaft
4.26. Pistons and rods - installation and check of a lubricant backlash of the bearing
4.27. The first start of the engine after a partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 











4a8e3442

4-15-kolenchatyjj-val-snyatie.html

4.15. A cranked shaft - removal


14.1 Check up axial люфта a cranked shaft with the help циферблатного the gauge
1. A cover of the radical bearing
2. Циферблатный the gauge



1. Before removal of a cranked shaft check up axial люфт with the help циферблатного the gauge (14.1) or a set щупов.

14.2 Arrows on covers of radical bearings it is turned to the forward party of the engine (to газораспределительному to a belt)
1. An arrow                                 
2. Bearing number


2. Mark covers of radical bearings if on them there are no marks (14.2) and, turning off bolts of covers on a turn quarter for time, turn off and remove bolts of covers.
3. Remove covers of radical bearings.
4. Remove a cranked shaft and establish covers of radical bearings into place, slightly having twirled fixing bolts.


4.14. Pistons and rods - removal

4.16. The block of cylinders - clearing