|
2-33-proverka-zamena-smazki-i-regulirovka-podshipnikov-zadnikh-koles.html
2.33. Check, replacement of greasing and adjustment of bearings of back wheels (only for models with back drum-type brakes)Check
1. Lift a back part of the car and establish it on support. Twist a wheel and check up,
|
|
32.1 Tools and the materials necessary for service of bearings of back wheels
1. A hammer
2. Greasing
3. The wooden block
4. Nippers
5. A Dinamometrichesky key
6. A screw-driver
7. Накидной a key
8. A brush
|
That it rotated without noise, resistance and excessively free course. Try to move a wheel forward-back on an axis. If a free course too big, bearings it is necessary to check up and replace greasing ( 32.1). Greasing replacement
|
|
32.2 Remove a dustproof cap
|
2. Remove a dustproof cap from a nave ( 32.2).
3. Get to the check and remove a lock ring ( 32.3а and 32.3б).
|
|
32.4 Remove a washer by means of a small screw-driver
|
4. Turn off and remove a nut of fastening of a nave and a washer ( 32.4).
|
|
32.5 Remove the external bearing
|
5. Pull a nave on itself and return back in initial position. Remove the external bearing ( 32.5).
6. Remove a nave and remove an epiploon from a nave underside. Remove the internal bearing. ( 32.6) 7. By means of solvent and a brush clear bearings, a nave and an axis. Examine bearings on presence of cracks and deterioration traces.
|
|
32.8 Put greasing on rollers bearings
|
8. Fill bearings and a nave with new greasing ( 32.8). Establish the internal bearing in a nave and establish a new epiploon. 9. Accurately establish a nave on an axis and establish the external bearing into place.
Adjustment - корончатая a nut
10. Establish a washer and a nut. Slightly twirl a nut.
11. Scroll a nave forward some times and ослабьте a nut inhaling.
12. Densely tighten a nut. Establish a lock ring and insert new to the check. Bend the ends checks.
|
|
32.13 Establish a dustproof cap into place
|
13. Establish a dustproof cap ( 32.13).
| 