Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
2.1. Technical characteristics
2.2. The general description
2.3. Operations of adjustment and special service
2.4. The maintenance service schedule
2.5. Check of level of oil and liquids
2.6. Check of a condition of a protector and pressure in tyres
2.7. Check of level of a liquid of system of hydrostrengthening of a steering
2.8. Check of level of a liquid in an automatic transmission
2.9. Replacement of engine oil and the oil filter
2.10. Survey and replacement of brushes of screen wipers of a windshield
2.11. Check and adjustment of a free course of a pedal of coupling
2.12. Check, maintenance service and accumulator gymnastics
2.13. Check, adjustment and replacement приводного a belt
2.14. Check and replacement of hoses in an impellent compartment
2.15. Check of system of cooling
2.16. Shift of wheels
2.17. Check of brakes
2.18. Replacement of the air filter and the filter of system of ventilation картера
2.19. Check of the gauge of position throttle заслонки
2.20. Check and adjustment клапанных backlashes
2.21. Check and adjustment of speed of idling (only for models with the carburettor engine)
2.22. Power supply system check
2.23. Steering and suspension bracket check
2.24. Check of covers of semiaxes
2.25. Check of system of release of growing gases
2.26. Check of level of oil in a mechanical transmission
2.27. Replacement of the fuel filter
2.28. Replacement of spark plugs
2.29. Check and replacement of wires of a high voltage, a cover of the distributor of ignition and бегунка
2.30. Check and clearing air заслонки the carburettor
2.31. Check of system of giving of hot air
2.32. Maintenance service of system of cooling (replacement of a cooling liquid and washing)
2.33. Check, replacement of greasing and adjustment of bearings of back wheels (only for models with back drum-type brakes)
2.34. Replacement of a brake liquid (only models Precis)
2.35. Replacement of a liquid and the filter of an automatic transmission
2.36. Replacement of oil of a mechanical transmission
2.37. Check of system of gathering of steams of fuel and replacement of the coal filter
2.38. Check and adjustment of a corner of an advancing of ignition
2.39. Check and replacement of the valve of system of ventilation картера
2.40. Replacement of the gauge of the maintenance of oxygen
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 











4a8e3442

2-10-osmotr-i-zamena-shhetok-stekloochistitelejj-lobovogo-stekla.html

2.10. Survey and replacement of brushes of screen wipers of a windshield

1. Brushes and levers of screen wipers are necessary for examining periodically on presence of traces of deterioration
Or damages. Regularly wash out brushes a soft soap solution for removal of an oil film and check reliability of fastenings.
Early models
2. Lift the lever of a screen wiper from glass, lift disconnecting рычажок and remove a brush from the lever. Remove a clip from edge of a brush by means of a small screw-driver and remove a rubber insert. Establish a new insert into place.
Late models
3. Lift the lever of a screen wiper from glass, press on a fixing uvula and remove a brush from the lever. Unbend edge of a rubber element with the help тонкогубцев and get two прутка. Then remove a rubber element from a framework. Establish a new rubber element on a framework and insert two прутка for its fixing.


9.2а Lift disconnecting рычажок and remove a brush from the screen wiper lever


9.2б By means of a small screw-driver remove a clip from brush edge, then remove a rubber insert


9.3а Press on a fixing uvula and remove a brush from the lever


9.3б With the help тонкогубцев get two cores from a brush


9.3в Then remove a rubber insert from a framework



2.9. Replacement of engine oil and the oil filter

2.11. Check and adjustment of a free course of a pedal of coupling