Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
12.1. Technical characteristics
12.2. The general description
12.3. System of antiblocking of brakes (АБС) - the general description
12.4. Brake overlays of disk brakes (forward and back) - replacement
12.5. A support of a disk brake - removal, a partition and installation
12.6. A brake disk - survey, removal and installation
12.7. Brake колодки drum-type brakes - replacement
12.8. The wheel cylinder - removal, a partition and installation
12.9. The main cylinder of brake system - removal, a partition and installation
12.10. The valve of restriction of pressure - removal and installation
12.11. Brake hoses and tubes - check and replacement
12.12. Prorolling of brake system
12.13. A servoamplifier of brakes - check, removal and installation
12.14. Manual
12.15. Ropes of a manual brake - replacement
12.16. The switch of fires of a stoplight - removal, installation and adjustment
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 











4a8e3442

12-4-tormoznye-nakladki-diskovykh-tormozov-perednikh-i-zadnikh-zamena.html

12.4. Brake overlays of disk brakes (forward and back) - replacement

Attention! It is necessary to replace brake overlays on both forward or back wheels simultaneously a Dust formed as a result of deterioration of brake overlays, contains asbestos which it is hazardous to health do not inhale it
1. Pump out a brake liquid from a tank
2. Put the car on a manual brake Lift the car
3. Remove wheels
4. Examine a surface of a brake disk

3.5а the Support of a forward brake - PFS15 (models Colt, Lancer, Mirage)
1. A bolt
2. A bolt
3. A support arm (with overlays and fastenings)
4. The plug
5. B.Vtulka's cover
7. A dustproof cap
8. Consolidation
9. The piston
10.
Brake hose
11. A support



3.5б the Support of a forward brake - AD54, model AD60 is similar (models Cordia/Tredia/Galant without
Turbo-supercharging)
1.
Finger
2. An arm
3. The plug
4. A cover
5.
Cover
6. A brake hose
7. A ring
8. The piston and a dustproof cap
9. Piston consolidation



3.5в the Support of a forward brake - models Galant with a turbo-supercharging of 1991 of release and later
1 Internal overlay                            
2 Fastening                                              
3 External overlay                                 
4 Overlay                                                
5 Fastening                                              
6 Arm                                             
7 Fixing ring                                 
8 Cover                                     
9 Piston                                                                
10 Consolidation               
11 Fixing ring                                                        
12 Cover                                          
13 Piston                                                      
14 Consolidation
15 Cover
16 Support
17 Finger
18 Finger
19 Plug
20 Cover



3.5г the Support of a forward brake - support Sumitomo (model Precis)
1 Dustproof screen                           
2 Brake disk                                     
3 Support                                                   
4 Consolidation                                             
5 Piston                                                 
Заглушка                                                
7 Cap                                                
8 Consolidation                                             
9 Overlays                                                
10 Antinoise overlay              
11 Pin                                              
12 External support                      
13 Clip                                                                
14 Protective plate                          
15 Clip
16 Arm
17 Plug
18 Fixing ring
19 Fixing ring
20 Consolidation
21 Final screw



3.5д the Support of a forward brake - support Tokico (model Precis)
1  Covers
2 Finger
3 Bolt
4 Arm
5 Spring
6 Overlay
7 Brake overlays
8 Covers
9 Piston
10 Consolidation
11  Covers
12 Plug
13 Cyппортi
14 Plug
15 Bolt
16 Final screw
17 Cap
18 Connecting bolt
19 Hose
20 Washer



3.5е the Back disk brake - model AD54 (model Galant)
1 Brake hose
2 Finger
3 it is not used
4 Plug
5 Cover
6 Cover
7  
Fixing ring
8 Dustproof cover
9 Piston
10 Consolidation
11 Cutting lock ring
12 Casing
13 Returnable spring
14 Spring washer
15 Terminator
16 Axis of the adjusting mechanism
17 Connecting link
18 Sealing ring
19 Lever
20 Cover
21 Lever of a manual brake
22 Returnable spring
23 Final screw
24 Support
25 External overlay
26 Overlays
27 Fastening
28 Fastening In
29 Finger
30 Plug
31 Arm



5. Operation of replacement of overlays differs on different models (3.5а, 3.5б, 3.5в, 3.5г, 3.5д and 3.5е)

Supports Sumitomo (model Precis)

3.6а Remove a protective plate



3.6б Clear brakes a cleaning solution



3.6в Disconnect the M-shaped clip from an external brake overlay...



3.6г... Then remove a clip



3.6д By means of flat-nose pliers remove the K-shaped clip



3.6е Get both fingers



3.6ж By means of a clamp press an internal overlay to a support to lower the piston deep into the cylinder to receive additional space for installation of new overlays



3.6з Get brake overlays from a support



3.6и Remove antinoise overlays



3.6к Before installation of new overlays put antinoise structure on an underside of overlays



3.6л Establish new overlays and fastenings



Supports of all other models

3.7 By means of a clamp press the piston deep into the cylinder



7. By means of a s-shaped clamp press the piston deep into a support (3.7)

3.8 Remove the bottom fixing bolt or a finger



8. Remove the bottom fixing bolt or the bottom finger (3.8)

3.9 Lift a support and suspend it



9. Lift a support and tie up it (3.9)

3.10 Remove brake overlays



10. Remove  overlays  from  an arm  of a support (3.10)
11. Lower the piston deep into a support the hammer handle
12. Grease  with antinoise  greasing  the back party of brake overlays
13. Establish spring clips on an arm Establish an antinoise overlay on an external overlay (3.5а, 3.5б, 3.5в, 3.5г, 3.5д) and establish overlays on an arm
14. Lower a support on overlays and establish the bottom fixing bolt or a finger, having tightened it till the demanded moment of an inhaling
All models
15. After replacement of overlays squeeze out a brake pedal some times
16. Check up liquid level in a tank


12.3. System of antiblocking of brakes (АБС) - the general description

12.5. A support of a disk brake - removal, a partition and installation