Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
12. Brake system
12.1. Technical characteristics
12.2. The general description
12.3. System of antiblocking of brakes (АБС) - the general description
12.4. Brake overlays of disk brakes (forward and back) - replacement
12.5. A support of a disk brake - removal, a partition and installation
12.6. A brake disk - survey, removal and installation
12.7. Brake колодки drum-type brakes - replacement
12.8. The wheel cylinder - removal, a partition and installation
12.9. The main cylinder of brake system - removal, a partition and installation
12.10. The valve of restriction of pressure - removal and installation
12.11. Brake hoses and tubes - check and replacement
12.12. Prorolling of brake system
12.13. A servoamplifier of brakes - check, removal and installation
12.14. Manual
12.15. Ropes of a manual brake - replacement
12.16. The switch of fires of a stoplight - removal, installation and adjustment
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 











4a8e3442

12-16-vyklyuchatel-ognejj-stop-signala-snyatie-ustanovka-i-regulirovka.html

12.16. The switch of fires of a stoplight - removal, installation and adjustment

1. Remove the bottom panel of furnish under a steering column.
2.  The switch of fires of a stoplight is located at the left over a brake pedal. Disconnect a socket of connection of the switch.
3. Turn off a counternut on the switch and unscrew the switch from an arm.
4. Installation is spent upside-down removals. For switch adjustment turn off a counternut and tighten up the switch so that плунжер the switch has been pressed, when the brake pedal is released. Tighten a counternut on termination of adjustment.



12.15. Ropes of a manual brake - replacement

13. A suspension bracket and a steering