Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
11.1. Technical characteristics
11.2. The general description
11.3. Coupling - the description and check
11.4. Coupling elements - removal, check and installation
11.5. Выжимной the bearing, a plug of deenergizing of coupling and a plug axis - removal and installation
11.6. A rope of a drive of deenergizing of coupling - removal, installation and adjustment
11.7. The main cylinder of a drive of deenergizing of coupling - removal, a partition and installation
11.8. The working cylinder of a drive of deenergizing of coupling - removal, a partition and installation
11.9. Hydraulic system of a drive of deenergizing of coupling - prorolling
11.10. Semiaxes - the general description and survey
11.11. Semiaxes - removal and installation
11.12. Replacement of covers and a partition the SHRUS the Internal SHRUS and a cover the Ball hinge
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 





4a8e3442






11-6-trosik-privoda-vyklyucheniya-scepleniya-snyatie-ustanovka-i-regulirovka.html

11.6. A rope of a drive of deenergizing of coupling - removal, installation and adjustment

Removal
1. Disconnect a wire of the minus plug of the accumulator.
2. Turn off an adjusting nut.
5.3а the Rope fastens to the lever of a plug by means of a pin and checks - after their removal, it is possible to remove a braid of a rope and the plug

3. Get a braid of a rope from an arm and disconnect a rope from a coupling pedal (5.3а and 5.3б)
5.3б Disconnect a rope from a coupling pedal

4. Get a rope through a back wall of an impellent compartment.
Installation and adjustment
5. At installation grease the ends of a rope with multipurpose greasing. Rope installation is spent upside-down removals.


11.5. Выжимной the bearing, a plug of deenergizing of coupling and a plug axis - removal and installation
11.7. The main cylinder of a drive of deenergizing of coupling - removal, a partition and installation