Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
11. Coupling and semiaxes
11.1. Technical characteristics
11.2. The general description
11.3. Coupling - the description and check
11.4. Coupling elements - removal, check and installation
11.5. Выжимной the bearing, a plug of deenergizing of coupling and a plug axis - removal and installation
11.6. A rope of a drive of deenergizing of coupling - removal, installation and adjustment
11.7. The main cylinder of a drive of deenergizing of coupling - removal, a partition and installation
11.8. The working cylinder of a drive of deenergizing of coupling - removal, a partition and installation
11.9. Hydraulic system of a drive of deenergizing of coupling - prorolling
11.10. Semiaxes - the general description and survey
11.11. Semiaxes - removal and installation
11.12. Replacement of covers and a partition the SHRUS the Internal SHRUS and a cover the Ball hinge
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 











4a8e3442

11-12-zamena-chekhlov-i-pereborka-shrus-vnutrennijj-shrus-i.html

11.12. Replacement of covers and a partition the SHRUS the Internal SHRUS and a cover the Ball hinge

1. Remove полуось from the car.
2. Establish полуось in a vice.

11.3 Unbend fixing uvulas a screw-driver and remove a collar



3. Remove collars, крепящие a cover (11.3).

11.4 Remove a lock ring...


4. Remove a cover aside and remove a lock ring from an external holder (11.4).

11.5а... Then remove an external holder


11.5б Elements of a semiaxis and the SHRUS
1. A lock ring (always replace)
2. An external holder
3. A lock ring
4. A cutting lock ring
5. An internal path качения
6. A holder
7. Balls
8. An internal cover
9. A collar
10. A collar
11. A collar
15. An external cover
13. An external SHRUS
14. Dynamic демпфер
15. A collar dynamic демпфера



5. Remove an external holder (11.5а and 11.5б).

11.6 Remove a cutting lock ring from the semiaxis end



6. Remove a cutting lock ring (11.6).

11.7 Mark position establish internal a path качения and holders


7. Make marks in an internal path качения and a holder (11.7).
8. Remove the internal bearing from a semiaxis.

11.9 Get balls - be accurate not to scratch them



9. Get balls from a holder (11.9).

11.10а Combine ledges on an internal path качения with apertures in a holder...



11.10б also remove an internal path качения


10. Get an internal path качения from a holder (11.10а and 11.10б).

11.11а Examine an internal path качения on presence of corrosion and scratches



11.11б Examine a holder on presence of cracks, corrosion and scratches



11. Clear all elements and examine them on presence of cracks, scratches or other damages (11.11а and 11.11б).
Assemblage
12. Insert an internal path качения into a holder.

11.13 Establish balls in a holder



13. Establish balls in a holder (11.13).

11.14 Wrap up шлицы semiaxes a sticky tape not to damage a cover at installation


14. Wrap up  шлицы  semiaxes  a sticky  tape (11.14). Establish a small collar and a cover on полуось, then remove a tape.
15. Establish an internal path качения and a holder on полуось.
16. Establish a cutting lock ring in a flute.

11.17 Fill a holder with greasing



17. Fill a holder with greasing (11.17). Fill an external holder and a cover with remained greasing.
18. Establish an external holder into place and establish a lock ring.

11.19 Adjust length the SHRUS (distance between collars) before an inhaling of collars



19. Wipe greasing from a flute on an external holder. Establish  a cover  and  adjust length  of a semiaxis (11.19).

11.20 Let out pressure from under a cover, having raised cover edge



20. Let out air from under a cover, having raised its edge a screw-driver (11.20).

11.21а For installation of a new collar, bend the collar end...



11.21б... Also bend fixing uvulas


21. Establish collars (11.21а and 11.21б).
22. Establish a new lock ring (11.7).
23. Establish полуось on the car.
Триподный the hinge

11.24 Elements of a semiaxis and SHRUS with триподом
1. A collar
2. A collar
3. A casing
4. A cutting lock ring
5. Трипод
6. A cover
7.
Collar dynamic демпфере
8. Dynamically демпфер
9. A collar
10. A collar
11. A cover
12. An external SHRUS
13. A lock ring



24. Cut off collars and shift a cover (11.24). Make marks in a casing трипода and semiaxes, then remove a casing.
25. Wrap up трипод a rag.

11.26 Remove a cutting lock ring and remove трипод from a semiaxis
1. A cutting lock ring



26. Remove трипод from a semiaxis, having removed a cutting lock ring (11.26).
27. Remove a cover from a semiaxis.
28. Clear all elements of the hinge of old greasing and examine them on presence of corrosion, scratches or damages.
29. Wind шлицы semiaxes with a tape, then establish a small collar and a cover on полуось (11.14).
30. Fill a casing with half of greasing from the repair complete set, and with the rest fill a cover.
31.Установите трипод.
32. Establish a casing.
33. Establish a cover into place and adjust length the SHRUS (11.19). Establish collars and establish полуось on the car.
External SHRUS and cover Removal and a partition
34. Remove an internal SHRUS from a semiaxis and disassemble it.
35. At repair of the left semiaxis mark position of installation dynamic демпфера on a semiaxis and remove it.
36. Remove a cover external the SHRUS.
Check
37. Wash out an internal and external SHRUS pure solvent and dry up them.

11.38 Wash out and dry up the hinge, then turn a casing of the hinge and examine a surface of bearings on presence of traces of deterioration or damages - if balls, the internal path or a holder are damaged, replace полуось and an external SHRUS



38. Turn a casing of the hinge for access reception to bearings and a holder (11.38). Examine a surface of bearings on presence of traces of deterioration. If bearings are damaged or worn out, replace полуось.
Assemblage
39. Establish a new external cover on полуось. Fill the hinge and a cover with greasing. Establish new collars.
40. On the left semiaxis establish dynamic демпфер.
41. Clear and collect an internal SHRUS, then establish полуось on the car.



11.11. Semiaxes - removal and installation

12. Brake system