10.8. The blocking switch - check, replacement and adjustment

1 Try to start the engine at various positions of the lever of the selector - the starter should join only when the selector lever is in position neutral or парковочной transfers

2 Remove the accumulator and the air filter

3 Translate the selector lever in position of neutral transfer

7.4 Turn blocking switch so that its flange has been combined with shorter of two рычажков (), then tighten bolts 1 Lever 2 Bolts 3 Flange of the switch

4 Turn off a nut and disconnect the lever from an axis on a transmission (7.4)

5 Disconnect a socket of connection of the switch

6 Turn off two fixing bolts and remove the switch

7 Installation is spent upside-down removals

8 Turn the switch so that shorter of two рычажков has been combined with a flange on the switch case, then tighten bolts till the demanded moment of an inhaling (7.4)

9 Check up work of the mechanism of the selector and adjust the switch repeatedly if it is necessary