Mitsubishi Colt (with 1983 for 1993 of release)
1. The maintenance instruction of cars Mitsubishi Colt / Lancer / Mirage / Galant / Eterna / Saporro / Sigma / Magna / Cordia / Tredia / Precis with 1983 for 1993 of release
2. Adjustment and current maintenance service
3. The engine
4. An engine partition
5. Systems of cooling, heating and an air conditioning
6. The power supply system and release of the fulfilled gases
7. An engine electric equipment
8. Systems of decrease in toxicity of exhausts
9. A mechanical transmission
10. An automatic transmission
10.1. Technical characteristics
10.2. The general description
10.3. Search and elimination of malfunctions of an automatic transmission - the general description
10.4. Replacement of epiploons
10.5. Transmission fastenings - check and replacement
10.6. A rope of the lever of the selector of an automatic transmission - removal, installation and adjustment
10.7. A rope throttle заслонки (models with a three-stage transmission) - check and adjustment
10.8. The blocking switch - check, replacement and adjustment
10.9. An automatic transmission - removal and installation
11. Coupling and semiaxes
12. Brake system
13. A suspension bracket and a steering
14. A body
15. A body electric equipment
 











4a8e3442

10-4-zamena-salnikov.html

10.4. Replacement of epiploons

1. For replacement of an epiploon of a semiaxis lift the car and establish it on support.
2. Remove semiaxes.

3.3 Insert a tip of the big screw-driver (it is specified by an arrow) behind an epiploon and accurately get it


3. By means of the big screw-driver accurately get an epiploon from a nest of a transmission (3.3).

3.4 Apply a thin film greasings on an external edge of a new epiploon and accurately establish it in a nest by means of the big head and a hammer


4. Apply a thin film greasings on an external edge of a new epiploon and accurately establish it in a nest by means of the big head and a hammer (3.4).
5. Establish semiaxes. Be accurate not to damage an edge of a new epiploon.
6. If the sealing ring of a gear wheel of a drive of a speedometer proceeds, disconnect a rope of a speedometer from a transmission.
7. Turn off a fixing bolt and remove a speedometer drive.


3.8 Elements of a drive of a speedometer
1. A sealing ring
2. A spring pin
3. A gear wheel
4. A sealing ring
5. The plug


8. Beat out a spring pin and get a gear wheel from the plug (3.8).

3.9 At gear wheel installation in the plug check up, that the spring pin has been established by a cut from a gear wheel axis


9. Establish new sealing rings on a conducted gear wheel, collect a drive and establish a new spring pin (3.9).
10. Establish a drive on a transmission and connect a speedometer rope.



10.3. Search and elimination of malfunctions of an automatic transmission - the general description

10.5. Transmission fastenings - check and replacement