1.41.17. Screen wiper levers
7. Check up a lever condition. At easing of springs and deterioration signs шлицов the lever replace.
8. The nut of fastening of the lever of a brush is closed by a cap. At lever removal these caps need to be removed for access to a nut.
9. Be convinced, that the lever is in parked (extreme bottom) position. If necessary include a screen wiper and switch off, that levers were established in the necessary position. Along brushes paste on glass a sticky tape to designate position of brushes.
10. Turn away a nut and remove the lever from an axis. Remember an order of an arrangement of all details - washers, plugs, linings, etc. (photo). If necessary hook the lever a screw-driver, being careful not to damage colouring. Before removal of the lever of a brush of back glass from an axis, the lever is recommended to be lifted.
11. Installation is carried out upside-down. Establish new brushes, having combined them with strips of the pasted tape. After the termination remove the pasted strips from glass.